Parkonect: How to Powercycle a Door Controller

Modified on Thu, 12 Oct, 2023 at 4:35 AM


At times you will need to powercycle a door reader in order to reconnect the device to your network. To do so you will need to press the power button located in figure 2c as seen below and the startup sequence should take 2-3 minutes. After which, the screen should display "Please Scan Pass". Please let us know if that resolves the issue or if further troubleshooting is necessary.

For older units you will need to unplug the internal power cable and plug back in as seen below.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article