Parkonect: Replacing Ticket Roll Guide (2020 & Later Models)

Modified on Thu, 9 Nov, 2023 at 10:57 AM


Here's a step by step guide to replace ticket rolls:

1. Push the blue plunger in to disengage the platen.

2. Pull the old ticket roll out of the printer.

3. Load the new ticket roll onto the spindle. Replace washer & pin.

4. Pull the blue plunger back out to re-engage the platen.

5. Feed the ticket roll into the back of the printer.

6. The printer will automatically detect the new ticket roll and will start to try to feed it through. Push the paper in until it catches the feed rollers at which point the printer will print a status report for the printer.

Attached is a quick user guide for this device.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article